Serbian CoolRolla TS :)

[dzvini]

Back on track

New oil and filter





New battery...



23 square meters of ceramic tiles in the boot





Rear speakers changed with 2-component speakers JBL CS-6C. There where holes for tweeters in rear panels from before already so I've decided to just fit the new ones as easy as I can...

[Bart-E11]

Still love the green ultralegerra one of the nicest wheels ever made

Did you changed the front speakers already ?

[CoupÉter]

that's low

[dzvini]

A new toy for my Toy



This one is a short shifter for Celica T23 because it's a lot cheaper then those Corolla ones, so it needs some small modifications as you probably already know I had no patience waiting to do the bend, so I've installed it straight as it is.

http://postimg.org/gallery/b42wk21u/a8a4c38b/" onclick="window.open(this.href);return false;

http://youtu.be/YTS3XJb3UOQ" onclick="window.open(this.href);return false;

[dzvini]

6-7 months ago I said that I had no patience waiting to do the bend and I've installed it as it was.

But, after few days I had to pull it out because it was very difficult to change gears, it was a bit further then needed.

Then I did this "project" and thought how will I modify that shifter to suit me better



...and for several months I didn't use shortshifter at all, and I didn't try modifying it at all...till today!

A friend of mine took this job seriously. First he just bend it a bit, not as in my "project" but similar and a lot easier





...so I tried it but still it wasn't enough, my elbow was slipping from the arm rest. So, than he lengthen the upper part for about 5cm (that is still around 3-4cm shorter then oem, and the lower part is around 10-12mm longer then the oem one)...









http://youtu.be/qHjZ0UtEeE0" onclick="window.open(this.href);return false;

For now it will stay this way. I will drive it for a few days and if it's good, I won't change it any more

[dzvini]

First spring cleaning





New tyres at the rear, GoodYear Eagle F1 Asymmetric 215/35/18, dot4413 :eyebrows



And I've played a little with cans of Heineken-a





It will be 200.000km soon Front bumper took 2 new hits at the parking and this Monster sticker is already washed, so I will put other bumper that is already painted, and there will be oem spoiler at the bottom...

[dzvini]

Finally I have original summer mats



After 5 years and 55.000km with me...I've just took a picture on my way to petrol station and refilled the tank

[CoupÉter]

i wish i could refill once in 55.000 km

[J-Corolla]

Your Heineken can center caps are awesome
Forum member Noedel also did this with one of his wheel sets once, using Red Bull can tops as center caps.

[dzvini]

It's been years that my brakes are bad, so finally I had a chance to see the problem...



And I was wondering why my car's brakes are bad!? :/ Textar new discs and pads at the back straight away!



It's a lot better now, braking fine, even the handbrake works now, practically I didn't have it at all till now. :/

Maybe I will upgrade front brakes soon with some bigger calipers and discs

Decided to take down the foil, it bored me already and started to peal on some spots...



Monster sticker bored me after few seasons and I've changed the bumper, and also put slightly modified oem spoiler lip from the facelift model, there were small holes in it so I've put some aluminum mesh in it...













Active subwoofer Kenwood ksc-wa100 that works pretty good

[dzvini]

And some proper photos with a proper camera

[CoupÉter]

nice!

[dzvini]

Few more pictures with my friends Celica TS

[CoupÉter]

both realy nice cars

[dzvini]

I've decided to complete my winter suspension, just to save my BC's a little bit A friend gave me old shocks and I bought new Eibach springs, I need to buy top hats, drop links, dust covers, bump stops and few more bits...

[dzvini]

Finally I've got good winter wheels, OZ Ultraleggera 7x17" et30

They are in a really good shape, I didn't expect that at all so I won't change the color for now probably, at least not before I actually try them on the car

[dzvini]

I am planning to improve front brakes by installing a custom kit, calipers are from Alfa Romeo 166 V6, and still thinking and calculating, trying which discs will suit the best...
For now, it will probably be disc from a Renault Clio/Megane 2,0 RS, those are 312,5mm x 28mm, while Alfa's are 310x28 but more important is the depth of discs, Corolla TS has 24,2mm, Alfa has 19,5mm and Renault 35mm deep disc, so that makes them stand further away from the wheel's spokes. V6 Calipers are huge and around 60mm wider than oem so they will stick out 30mm more then Corolla's

Disk on these pictures is 330mm x 32mm from a Mercedes CLS, just for a test fitting...

[Noedel]

Wow, that's a nice set of winter wheels, and a nice list of brakes!

Grtz

[dzvini]

Few weeks ago I've bought this box and just tried it for a few days, it's nice and loud but I won't put it back on the car before spring





Also, I've tried my winter set with BC Racing set on -70mm

http://s27.postimg.org/fb1a2si9v/2014_1 ... _49_27.jpg" onclick="window.open(this.href);return false;
http://s27.postimg.org/rkfpfpd37/2014_1 ... _53_18.jpg" onclick="window.open(this.href);return false;
http://s27.postimg.org/prcsrdrwj/2014_1 ... _53_26.jpg" onclick="window.open(this.href);return false;

http://s27.postimg.org/7r3lmzzpf/2014_1 ... _53_50.jpg" onclick="window.open(this.href);return false;
http://s27.postimg.org/5nt6fbzwj/2014_1 ... _53_56.jpg" onclick="window.open(this.href);return false;

http://s27.postimg.org/jnztl7r0j/2014_1 ... _54_01.jpg" onclick="window.open(this.href);return false;
http://s27.postimg.org/6z5j1jkw3/2014_1 ... _55_08.jpg" onclick="window.open(this.href);return false;
http://s27.postimg.org/hxgsjq9hf/2014_1 ... _54_57.jpg" onclick="window.open(this.href);return false;
http://s27.postimg.org/6u1rrvdkz/2014_1 ... _54_50.jpg" onclick="window.open(this.href);return false;



http://s27.postimg.org/leiump8jn/2014_1 ... _58_05.jpg" onclick="window.open(this.href);return false;





http://s27.postimg.org/6swfc714z/2014_1 ... _31_11.jpg" onclick="window.open(this.href);return false;

Then I've tried my summer wheels with winter height, OEM shocks and Eibach Pro Kit -30mm



http://s11.postimg.org/mpne3lqwj/2014_1 ... _31_34.jpg" onclick="window.open(this.href);return false;
http://s11.postimg.org/48odz1lkj/2014_1 ... _31_59.jpg" onclick="window.open(this.href);return false;



http://s11.postimg.org/5dn1i5xf7/2014_1 ... _49_35.jpg" onclick="window.open(this.href);return false;
http://s11.postimg.org/emp7sa6b7/2014_1 ... _49_48.jpg" onclick="window.open(this.href);return false;

And this is the final look for this winter

[J-Corolla]

Haha, your winter look is what some would consider a 'finished' look here

[Noedel]

You call it winter, I call it very sunny!

[dzvini]

Haha, I know

[dzvini]

Just trying calipers on 330mm disc with 18" for taking all necessary measurements.



http://s22.postimg.org/xsdz18uxt/2014_1 ... _46_26.jpg" onclick="window.open(this.href);return false;
http://s22.postimg.org/wc2gj3s0x/2014_1 ... _46_33.jpg" onclick="window.open(this.href);return false;
http://s22.postimg.org/wfw9zcxi9/2014_1 ... _46_41.jpg" onclick="window.open(this.href);return false;

[dzvini]

A little project over the winter, cleaning bits and changing springs, they cracked after 5 years, didn't expect that but... :/



Wanted to try some PlastiDip paint on the front sign and in the interior...Tried on this peace of plastic first to see how it feels and peels

https://vimeo.com/114963247" onclick="window.open(this.href);return false;
https://vimeo.com/114964477" onclick="window.open(this.href);return false;





Winter mode with -16* celsius



Santa brought me a present, front Alfa V6 pads, but still waiting on front Focus RS1 discs



http://s16.postimg.org/wl7xpfr4l/WP_201 ... 00_Pro.jpg" onclick="window.open(this.href);return false;

[Perre]

green wheels with a heineken can centre look awesome.
How do you put those cans in there anyway?

[dzvini]

You have to cut the can aprox 10-15mm from the top and make something similar to a flower...I will put a picture later if I can find one

[Bart-E11]

Wondering what you going to do with the brakesetup
keep posting

[dzvini]

green wheels with a heineken can centre look awesome.
How do you put those cans in there anyway?

Like this

[Perre]

Haha, ice.
It wouldn't look like anything on the rims I have but on yours it's amazing.
Good to know though, maybe sometime in the future in a whim of crazyness

[dzvini]

Time flies

Brake calipers are restored, everything ready for installation, that is hopefully soon



Coilovers restored too, shocks are still good but couple of springs were cracked/broken :/ so I decided to buy several different sets for front/rear shocks



I've been playing with rear coilovers for 3 hours, they let me do it by myself



I am satisfied how it looks and "sits" right now



Changed the air filter instead of cleaning the old one



Finally installed rear panel speaker adapters



My present project is headlight restoration and DIY Morimoto projectors installation, I would like to put a couple of projectors in each and paint everything black, we'll see if that's possible



Then I will install this FK mask



also paint and install front TTE lip that will probably crack in few days because it's terribly low in the front

http://www.nktuning.com/_var/gfx/63ec89 ... 63b3c7.jpg" onclick="window.open(this.href);return false;

This is enough for now